Form 2-TP (air)
– annual statistical reporting, which is filled out by legal entities and individual entrepreneurs who have stationary sources of emissions of pollutants (pollutants) into the atmospheric air (you can see what is the source of pollutant emissions on the page Project MPE - what is it?), regardless of whether they are equipped your sources of emissions from treatment plants or not.
If a legal entity has separate divisions, the form is filled out both for each separate division and for a legal entity without these separate divisions.
LAW
Order of Rosstat No. 387 of 08/04/2016 On approval of statistical tools for organizing federal statistical monitoring of agriculture and the natural environment.
Procedure for submitting form 2-TP (air)
Companies and individual entrepreneurs who own stationary sources that produce harmful emissions into the environment (including boiler houses) are required to submit special reports.
Even those who have equipped their production with treatment plants are not exempt from it. If a legal entity has separate divisions, reporting is submitted for each of them. Bankrupt companies in respect of which bankruptcy proceedings have been opened are not exempt from submitting these reports. Representative offices of foreign companies operating in Russia also submit a 2-TP air report if their activities are related to air pollution.
Reports in form 2-TP air are filled out by businessmen (legal entities and individuals) who have issued the appropriate emission permits. There are 2 types of permissions:
- for emissions in the amount of 5–10 tons per year with the presence of pollutants of hazard classes 1–2;
- over 10 tons annually.
If the permit for emissions of pollutants into the atmosphere has expired, enterprises (IEs) provide actual data on emissions according to the same criteria as respondents with valid permits.
Form 2-TP air, approved by Rosstat order No. 661 dated November 8, 2018, is submitted by the respondent to the local branch of Rosprirodnadzor by January 22 of the year following the reporting year. This means that the report for 2021 must be submitted no later than 01/22/2021.
If the objects of negative impact are located on the territory of different constituent entities of the Russian Federation, then the report must be submitted at the place of registration of each “negative” object (clause 3 of the Instructions for filling out form No. 2-TP (air). Download the form 2-TP air for free from the link below :
Main errors according to the on-load tap-changer information
Typical superficial violations when filling out and submitting reports include:
Indication of OKTMO of the respondent, and not the object of the NVOS; Indication of the OKVED code of the respondent, and not the object of the NVOS; Signing of reports by an unauthorized person. Moreover, this applies to both electronic documents and paper documents. ⠀ To reduce their number (or even eliminate them altogether), please pay attention to the following. ⠀ 1. It is the OKTMO of the NVOS facility that is to be reflected in the reporting, which is established in accordance with “OK 033-2013. All-Russian Classifier of Municipal Territories”. The current version of OKTMO can be found on the official website of Rosstat in the “Open Data” section (https://rosstat.gov.ru/opendata/). ⠀ 2. OKVED should also concern only the object of the NVOS, and not the respondent. The code is determined according to “OK 029-2014 (NACE Rev. 2). All-Russian Classifier of Types of Economic Activities”, approved by order of Rosstandart dated January 31, 2014 N 14-st (with subsequent amendments and additions). ⠀ 3. When sending reports, it is necessary to ensure that the official specified in the reporting matches the official specified in the power of attorney, and, of course, the official who signed the reporting. This is all especially relevant for electronic documents, because the situation is trivial when Lozhkin is listed as the signatory, while Petrov’s digital signature is used, and checking the key certificate points to Skvortsova. ⠀
How to fill out a report on form 2-TP (air)
The full name of the respondent is given in the address block of the report. Moreover, it must strictly coincide with that specified in the current constituent documentation of the company. After the full name of the company, you should enter, if available, an abbreviated version (in parentheses). The individual entrepreneur indicates his last name, first name and patronymic.
To fill the 2-TP with air, primary metering data is used. In addition to the actual data reflected in the primary documentation, it is allowed to use industry standards to fill out statistical information. The report reflects information on polluting substances captured, utilized (or used) and emitted into the atmosphere.
IMPORTANT! The 2-TP air form takes into account emissions into the atmosphere produced exclusively by stationary sources of pollution. The individual entrepreneur will only need to fill out section 1 and column 1 from section 3.
Substances used later in technological production processes that are released along with gases are also not taken into account. An example is the technical processes for extracting carbon monoxide released with blast furnace gas in ferrous metallurgy. This substance is subsequently used as fuel.
That is, only those emissions are taken into account that were not captured by special adsorbing installations due to the peculiarities of the technological process or equipment leaks.
If during the reporting period there was a reorganization or other change in the structure of the respondent organization, this information is necessarily reflected in the explanation attached to the reporting form.
The statistical reporting 2-TP air provides data on all pollutants released into the atmosphere (with the exception of CO2, O3 and radioactive substances) and aspiration air from stationary sources producing emissions. The amount of emissions (including as a result of emergency situations) is determined by measurements made with special tools and calculations based on approved standards.
Read about how the above standards are developed in our article “Development of draft standards for waste generation” .
All emissions produced by:
- from organized stationary sources (pipes, ventilation shafts);
- unorganized sources of pollution (burning waste heaps, tanks with gases/liquids accumulated as a result of an accident, etc.).
When entering data into reports, you must ensure that:
- all columns have been filled in (if there is no data for a particular line, a dash is required), except for cases where there is no data for any column;
- when entering data into the columns, the value of the indicator indicated at the top of the page was taken into account;
- sections were completed for each negatively impacted facility being operated;
- the code of the object of negative impact assigned during registration was entered.
ConsultantPlus experts gave a step-by-step algorithm for filling out a report on form 2-TP (air). To do everything right, get trial access to K+ and go to the Ready Solution. It's free.
What can they be fined for and how much?
The Code of the Russian Federation on Administrative Offenses provides for penalties in the form of monetary fines for providing reports indicating false information or failure to submit a report within the established time frame.
According to Article 8.5 of the Code of Administrative Offenses of the Russian Federation, the amount of penalties is:
- 500 - 1,000 rubles for individuals
- 3,000 - 6,000 rubles for officials
- 20,000 - 80,000 rubles for legal entities and organizations
If inaccurate information is provided, legal entities are subject to a fine that compensates for the damage to the Federal State Statistics Service caused by the need to correct the final reporting.
Where to fill out form 2-TP (air)
To ensure that filling out the form does not cause any difficulties, we recommend using a sample from K+ experts. You can download a completed sample form 2-TP air from ConsultantPlus by receiving free trial demo access from the system using the link below:
If you need to submit Form 2-TP (waste), use the recommendations from ConsultantPlus experts. Get trial access to the legal system and go to the Ready Solution.
Responsibility for violation of the order of presentation
If statistical form 2-TP (air) is not submitted or submitted late, or if false data is indicated in it, then the organization and its officials, as well as individual entrepreneurs, may be brought to administrative liability under Art. 2.4, 13.19 Code of Administrative Offenses of the Russian Federation:
- a fine for an official and individual entrepreneur in the amount of 10 thousand to 20 thousand rubles, for an organization - from 20 thousand to 70 thousand rubles, if the offense is committed for the first time;
- a fine for an official and individual entrepreneur in the amount of 30 thousand to 50 thousand rubles, for an organization - from 100 thousand to 150 thousand rubles. in case of repeated offense.
To avoid being fined and to find out exactly when and what statistical forms need to be submitted to regulatory authorities, use the specialized service of Rosstat. A link to it is given in the article “Find out what statistical reporting and in what time frame you must submit.”
Where to submit reports
Statistical reporting is submitted and reviewed by government authorities that carry out environmental control at the place of registration of objects that have a negative impact on the environment (nvos). Data on separate organizations is provided separately for each facility, according to their territorial location.
Rules for submitting the form may vary by region. It should be clarified where and during what period the state accounting of stationary sources of air pollution is carried out.
There are several ways to provide reporting:
- Through the web portal of Rosprirodnadzor in the corresponding module “Filling out statistical reporting forms” online.
- Using a program downloaded from the Rosprirodnadzor web portal.
- Use the services of specialized companies or private reporting programs.
To fill it out yourself, download the form and enter the data in MS Office Excel. Reporting is accepted in electronic form, which requires an electronic digital signature to complete.
Results
All legal entities and individual entrepreneurs whose balance sheet includes functioning stationary sources of emissions of pollutants into the atmosphere must regularly submit data to the Rosprirodnadzor office. Information is submitted annually in form 2-TP (air).
It will also be useful to familiarize yourself with the procedure for paying the environmental fee.
You will learn information about payers from the article “Who should pay the environmental fee in 2020?” You can find more complete information on the topic in ConsultantPlus. Free trial access to the system for 2 days.
Checking the report
If you do not fill out the report digitally, then it is imperative to check the calculation:
List of specific pollutants, data on emissions of which are subject to priority reflection in section 2
